Technical Data · Australia
SH60-9 Excavator Specs for Australia | SHANBO
Full SHANBO SH60-9 specs — engine power, bucket capacity, digging depth, ground pressure — for Australia.
Configuration Notes
Which SH60-9 configuration is technically correct for conditions in Australia?
SITUATION
Engineers and fleet planners specifying a dozer for Australia compare engine power, operating weight, blade capacity, ground pressure, and drawbar pull against the actual material, gradient, and duty cycle on site. Buyers in this market typically face import duties, dealer margins, and long parts lead times on Western brands. Datasheet numbers alone do not predict field performance.
COMPLICATION
A machine correctly matched on paper can still overheat, lose traction, or wear its undercarriage prematurely if the configuration ignores ambient temperature, altitude, soil abrasiveness, and shift length. Manufacturers rarely publish which options are mandatory for a given environment — leaving engineers to discover under-spec at commissioning. A new factory-direct machine from Shandong cuts the dealer chain entirely, with 20-25 day CIF shipping and a 12-month warranty.
QUESTION
Which SH60-9 configuration is technically correct for conditions in Australia?
ANSWER
The SH60-9 delivers 60 hp at 6 t operating weight — the full parameter table is below. Beyond the base sheet, SHANBO configures heavy-duty variants (reinforced track frames, abrasion-resistant blade edges, sealed-and-lubricated track chains) and extreme-temperature packages for both Arctic and Gulf duty. Our application engineers match power-to-weight ratio and ground pressure to your specific material and gradient before quoting, and will state in writing which options are required rather than optional for Australia.
SPECIFICATIONS
Technical data at a glance
Standard factory configuration. Custom configurations and attachments available on request.
| Parameter | SH60-9 |
|---|---|
| Operating weight | 6,000 kg |
| Engine power | 44.7 kW / 60 hp |
| Bucket capacity | 0.21 - 0.32 m³ |
| Max digging depth | 3,890 mm |
| Max digging height | 5,750 mm |
| Max digging reach | 6,200 mm |
| Travel speed | 2.5 / 4.5 km/h |
| Ground pressure | 32 kPa |
| Engine model | Yanmar 4TNV94L |
| Emission | Tier III |
WORKING CONDITIONS & APPLICATIONS
Where the SH60-9 earns its keep
Every SHANBO Excavator is engineered around the conditions it works in. Below are the four duty profiles most commonly matched to the SH60-9.
- Urban construction: trenching for utilities, foundation digging for residential and small commercial buildings.
- Landscaping, small demolition, and backyard pool or basement excavation on constrained sites.
- Utility installation — water, gas, telecom ducting — in narrow urban streets where a compact tail-swing radius is required.
- Agricultural drainage and irrigation ditching on small farms and orchards in clay or loam soils.
ENGINEERED FOR THE LONG SHIFT
Key features of the SHANBO SH60-9
What makes the SH60-9 a competitive factory-direct alternative to Western-brand machines on like-for-like specifications.
- Yanmar 4TNV94L 44.7 kW / 60 hp engine — Tier III emissions-compliant with global diesel availability.
- Compact tail-swing design fits one-lane urban streets and confined demolition sites.
- 0.21–0.32 m³ bucket range, swappable for trenching, ditching, and grading without reconfiguration.
- 32 kPa ground pressure spreads the load on finished surfaces and landscaped areas.
FACTORY
Quality control from a verified Shandong production line
Shandong manufacturing — built on our own production lines
SHANBO operates three dedicated assembly lines in Shandong Province, China. Every bulldozer — from the compact SD16 to the heavy-duty SD32 — goes through a standardized build process with ISO 9001 quality controls at each stage.
- ✓ ISO 9001:2015 certified manufacturing facility
- ✓ 100% pre-delivery inspection and test-run before shipping
- ✓ 2,000+ machines shipped annually to 60+ countries
- ✓ Lifetime technical support and remote diagnostics
FAQ
Technical questions about the SHANBO SH60-9
Can the SH60-9 be configured for heavy-duty work? +
Does the SH60-9 handle extreme temperatures in Australia? +
What warranty do you offer? +
What is the production lead time? +
SHANBO OFFICIAL
Visit SHANBO official website
Browse our full product range, parts catalogue, and the factory-direct story.
INQUIRY
Request the complete SH60-9 technical datasheet
Tell us about your project. We typically reply within one business day.